Aluminium Sheet & PVC Coated 5052 - Mill Finish

Custom Lengths Available Upon Request

*MILL RUN ONLY
IN STOCK
NO STOCK - Contact Local UA branch for availability

Aluminium Sheet & PVC Coated 5052 – Mill Finish

ALUMINIUM HEAVY GAUGE SHEET PRODUCTS ARE MANUFACTURED TO SUIT THE REQUIREMENTS OF DISTRIBUTORS, STOCKISTS, AND SELECTED END USERS

Custom Lengths Available Upon Request

*MILL RUN ONLY
IN STOCK
NO STOCK - Contact Local UA branch for availability

5052H32

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Alloy 5052-H32 has a range of useful properties:

Decorative Finish
Hard Wearing
Non-Slip
Corrosion Resistant

Low Maintenance
Anti-Static
Light-weight
Applications

Alloy 5052 is typically used in:

Treadplate
Boiler making
Containers
Nameplates
Road Signs
Architectural Paneling

Welded Tubes
Chemical Industry
Irrigation
Desalination units
Pressure Vessels
Rivets

TEMPER TYPES

The most common tempers for 5052 aluminium is:
H32 – Work hardened by rolling then stabilised by low-temperature heat treatment to quarter hard

Generic Physical Properties
Physical Property	Value
Density	2.68 g/cm3
Melting Point	605 °C
Thermal Expansion	23.7 x10-6 /K
Modulus of Elasticity	70 GPa
Thermal Conductivity	138 W/m.K
Electrical Resistivity	0.0495 x10-6 Ω .m

Mechanical Properties
Sheet & Treadplate – 0.2mm to 6.00mm	BS EN 485-2:2008
Mechanical Property	Value
Proof Stress	130 Min MPa
Tensile Strength	210 – 260 MPa
Hardness Brinell	61 HB

The properties above are for material in the H32 condition.

WELDABILITY
Weldability – Gas: Good
Weldability – Arc: Very Good
Weldability – Resistance: Very Good
Brazability: Acceptable
Solderability: Not recommended

FABRICATION
Workability – Cold: Good
Machinability: Acceptable

Aluminium Sheet & PVC Coated 5052 – Mill Finish

Part Number	T mm	W mm	L mm	Alloy/ Temper	Finish	Nominal Mass/Piece
S1.012002400MI2FI	1.0	1200	2400	5052-H32	Mill	7.804
S1.612002400MI2FI	1.6	1200	2400	5052-H32	Mill	12.487
S1.612002400PV1FI	1.6	1200	2400	5052-H32	PV1	12.487
S1.612002400PZ1FI	1.6	1200	2400	5052-H32	PZ1	12.487
S2.012002400MI2FI	2.0	1200	2400	5052-H32	Mill	15.609
S2.012002400PV1FI	2.0	1200	2400	5052-H32	PV1	15.609
S2.012002400PZ1FI	2.0	1200	2400	5052-H32	PZ1	15.609
S2.512002400MI2FI	2.5	1200	2400	5052-H32	Mill	19.512
S2.512002400PV1FI	2.5	1200	2400	5052-H32	PV1	19.512
S2.512002400PX1FI	2.5	1200	2400	5052-H32	PX1	19.512
S2.512006000PZ1FI	2.5	1200	6000	5052-H32	PZ1	48.78
S2.512206000MI2FI	2.5	1220	6000	5052-H32	Mill	49.593
S2.515003000MI2FI	2.5	1500	3000	5052-H32	Mill	30.487
S2.515003000PX1FI	2.5	1500	3000	5052-H32	PX1	30.487
S3.012002400MI2FI	3.0	1200	2400	5052-H32	Mill	23.414
S3.012002400PV1FI	3.0	1200	2400	5052-H32	PV1	23.414
S3.012002400PX1FI	3.0	1200	2400	5052-H32	PX1	23.414
S3.012002400PZ1FI	3.0	1200	2400	5052-H32	PZ1	23.414
S3.012003000MI2FI	3.0	1200	3000	5052-H32	Mill	29.268
S3.012004700MI2FI	3.0	1200	4700	5052-H32	Mill	45.853
S3.015003000MI2FI	3.0	1500	3000	5052-H32	Mill	36.585
S3.015253000MI2FI	3.0	1525	3000	5052-H32	Mill	37.194
S3.018502400PX1FI	3.0	1850	2400	5052-H32	PX1	36.097
S4.012002400MI2FI	4.0	1200	2400	5052-H32	Mill	31.219

PV1 – 40/50 Micron Blue or Clear
PX1 – 80 Micron – Black 1 side, White the other
PZ1 – 100 Micron Laser Film – Black 1 side, White the other