Home
Ulltra Views Balustrade

ULLTRA VIEWS BALUSTRADE
View Extrusions

INTRODUCTION

SERVICE + SUPPORT

At Ullrich Aluminium we believe that it is not just all about the product, but that service and support to the customers, architects,designers, councils and fabricators is also very important. We strive to make dealing with Ullrich Aluminium an enjoyable experience.

APPLICATIONS

Ullrich Aluminium balustrades have been designed to suit a wide range of applications, from private residences to commercial developments, including such diverse projects as high-rise apartments, motels, retail premises, of pieces and municipal facilities

BALUSTRADE .75 ARCHITECTURAL SYSTEMS

Ullrich Aluminium specialises in the design and supply of architectural balustrades. With origins dating back decades, Ullrich Aluminium has supplied balustrading to numerous projects in Australia and abroad. As a result Ullrich Aluminium has acquired extensive experience.

ULLRICH ALUMINIUM DISTRIBUTION NETWORK

Ullrich Aluminium distributes the Architectural .75 balustrade system throughout Australia through a network of local fabricators and balustrade companies. The role of the local fabricator and balustrade companies is to liaise with customer’s, and to fabricate and install the product in accordance with the Ullrich Aluminium technical specifications and engineering.

ENGINEERING

The ‘safety of the end-user’ is Ullrich Aluminium Systems number one priority. Engineering plays an integral part of balustrade design, as the product must
be able to with-stand the loads stipulated in the Australian Building Code.

Ullrich Aluminium has a strong background in structural design. Product is not only designed with experienced engineering expertise, it is also physically tested. Ullrich Aluminium has in-house facilities set up especially for testing balustrade products.

MAINTENANCE

Safety barriers shall be maintained in a structurally sound condition and, where applicable, self-closing gates and other components required for the protection of children shall be kept operable. Defects shall be remedied immediately they are apparent.

SURFACE FINISH

While surface finishes do not last forever, observance of these instructions will maintain their appearance and significantly extend their useful life. Observance of these instructions is also required to achieve Durability performance and for surface finish warranties to be valid (where applicable). They apply to both anodized and powder coated surfaces.

CARE AND PROTECTION

Protect the balustrades at all times from contact with:

Wet cement or plaster splashes, chemicals, solvents, stains and fertilisers. If contact does occur, remove the contaminant immediately and wash as described below.
Copper, brass, lead, mild steel, CCA treated timber, cement or concrete less than 1 month old, and water which has contacted any of these substances.

CLEANING

The balustrade and its fixing points must be cleaned down at least every six months. In areas where pollutants are common such as industrial or geothermal areas, and for all sites within 1 km from the sea or in any sea spray zone cleaning must be carried out more frequently as required, but not less than every three months.

CLEANING PROCEDURE

Remove loose deposits with a wet sponge. Do not dry dust, or the surfaces will be scratched. Remove any moss growth, and ensure that all drain holes are unblocked, particularly those at the base of the posts.

Using a soft brush and a mild household detergent in warm fresh water, clean the surface to remove any dust, salt, or other deposits. Pay particular attention to any areas not washed naturally by the rain.

Always rinse well after cleaning with fresh water to remove any remaining detergent.

Warning: Solvents! Household cleaners! Bleaches! Abrasive cleaners! are possibly harmful to the surface finish! and must not be used. Accordance with the manufacturer’s instructions.