ULLTRACLAD SOLID ALUMINIUM CLADDING IS AN INTERLOCKING POWDER COATED HORIZONTAL AND VERTICAL WEATHERBOARD SYSTEM, WHICH IS DESIGNED TO BE USED AS A COMPLETE EXTERNAL WALL SOLID ALUMINIUM CLADDING SYSTEM FOR RESIDENTIAL AND LIGHT COMMERCIAL TYPE BUILDING.
The system includes horizontal and vertically fixed Ulltraclad Aluminium Weatherboard, internal and external corner moldings, starter strips, board joiners, board locators, joinery flashing and accessories.
Ulltraclad Aluminum Weatherboards are produced in a rusticated weatherboard profile, with either a smooth, corrugated or grooved (Tee Board) face, a bevel back weatherboard profile (Traditional), or flat face with negative joint detail (Shadowline) and are powder coated on the exposed surfaces.
When installed, the cladding is effectively 15mm thick. The weatherboard is supplied 5m lengths, however Shadowline board is also available in 6.5m lengths. Cladding extrusions are available in the following widths: Tee = 140mm, Traditional = 150mm, Vertical = 175mm, Standard = 190mm, Corrugated = 185mm, Shadowline = 205mm.
System components supplied by Ullrich Aluminium Pty Ltd for use with Ulltraclad Aluminium Cladding include:
+ STARTER STRIP
An extruded aluminium profile used to locate and secure the bottom of the first course of weatherboards, The starter strip is available in a powder coated finish.
+ EXTERNAL & INTERNAL CORNER MOLDING
Extruded aluminium 90° two-piece internal and external corner moldings available in a powder coated finish.
+ BOARD JOINTER
Extruded aluminium joiner for joining lengths of Ulltraclad weatherboard, powdered coated finish available.
+ BOARD LOCATOR
An extruded aluminium locator used to locate the bottom edge and secure the top edge of individual weatherboard courses. The board locators are 60mm long and are pre-drilled for fixing.
+ HEAD AND JAMB FLASHINGS
Extruded aluminium to suit the window or door trim opening, the flashings are available in a powder coated finish.
Depending on installation requirements, use 25mm x 8g type pan head stainless steel screws, 25mm x 25mm galvanized clouts OR 25mm x 8g self-drilling metal screws.
+ STANDARD LENGTH
When installed, the cladding is effectively 15mm thick. The weatherboards are supplied in 5m lengths, however, showdoline board is also available in 6.5m lengths. Cladding extrusions are available in the following widths:
Tee = 140mm
Traditional = 150mm
Verticle = 175mm
Standard = 190mm
Corrugated = 185mm
Shadoline = 205mm
Ulltraclad Aluminium Weatherboard and accessories are extruded by Ullrich Aluminum Co Ltd using 6060 TS grade aluminium alloy. Ulltraclad is available finished in a series of Dulux and Interpol powder coat colors. Other non-standard colors as well as anti-graffiti and timber look finishes also available on request.
HANDLING & STORAGE
Ulltraclad weatherboard and components must be stacked flat, off the ground and supported on a level platform. They must be kept dry either by storing under cover or providing waterproof covers to the stack. Care must be taken to avoid damage to powder coated surfaces. Weatherboard must always be carried on edge.
DESIGN RESPONSIBILITY – THE SPECIFIER FOR THE PROJECT MUST ENSURE THAT THE DETAILS PROVIDED BY ULLRICH ALUMINIUM PTY LTD ARE SUITABLE FOR THE INTENDED APPLICATION AND THAT ADDITIONAL DETAILING IS PROVIDED FOR SPECIFIC DESIGN OR ANY AREAS THAT FALL OUTSIDE THE SCOPE AND SPECIFICATIONS OF THIS LITERATURE.
This literature covers the use of Ulltraclad Aluminium Cladding using Ulltraclad weatherboards as an external wall cladding for buildings within the following scope:
+ Constructed with timber or steel framing complying with the BCA requirements.
+ Situated in AS1170.2 and AS4055 (residential) Building Wind Zones up to, and including cyclonic C3.
Ulltraclad weatherboards must only be installed on vertical, flat surfaces. Ulltraclad Aluminium Cladding is suitable for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. Ulltraclad Aluminium Cladding relies on the joinery meeting the requirements of AS2047 for the relevant Wind Zone.
For applications which are outside the scope of this literature and details not provided by Ullrich Aluminium Pty Ltd, the specifier must ensure that the design meets the relevant performance requirements of the Building Code of Australia (BCA). Ullrich Aluminium Pty Ltd recommends that professional design advice is sought in these circumstances.
Ulltraclad Aluminium Cladding, if designed, used and installed in accordance with the statements and conditions of this literature will meet the following provisions of the Australian Building Code: Structure, Durability, External Moisture, Hazardous Building Materials
Reference: National Construction Code NCC Vol.1 Pt F1 Damp & Weather Proofing NCC Vol. 2 Pt 3.5.3 Wall Cladding.
The finished floor level must have a minimum clearance to paved or unprotected ground as required by the BCA.
Ulltraclad Aluminium Weatherboards must overhang the bottom plate or a concrete slab as required by the BCA. The bottom edge of the Ulltraclad Aluminium Weatherboards must finish a minimum of 75mm above paved surfaces or unprotected ground.
SPECIAL FRAMING REQUIREMENTS
Double studs at internal corners extra packers may be required at external corners extra studs for Ulltraclad vertical joiners framing must be straight and true to achieve an acceptable wall finish
Ulltraclad Aluminium Cladding must be installed over building paper or wrap complying with BCA requirements, or other approved breather-type membranes.
Shop Online – Coming Soon!
Shop for aluminium products, extrusions, sheet and plate products from the comfort of your chair
RESOURCES AND DOWNLOADS
OUR PRODUCT FAMILIES
Download Our Ullrich Industrial Catalogue
Enter your email address and we will email it through