FLAG POLES

INCLUDES THE FOLLOWING: Cast alloy truck, sheave, cleat, polypropylene halyard, fixing brackets and flag clips.

EXTRAS: Yardarms – The use of a yardarm will reduce the maximum pole by 1.5 metres.

PLEASE NOTE: Base plate specification is available on request. However, it is suggested that your local authority be contacted before installations begins, as specifications can vary because of interpretation, soil substances etc. Ulrich Aluminium cannot be held responsible for installation of poles in any region.

Both type A and B poles are available with conventional rope halyard or with the Hide-away system for raising and lowering the flag.

This is a vandal-proof system in which the halyard control is completely hidden internally and also thereby eliminates chafing and noise.

The recommended finish is a two-pot polyurethane with a life expectancy of size years in norma circumstances.

Ullrich Aluminium flagpoles are regularly specified by leading architects and are supplied complete with halyard, base plate, bolts and nuts, hinges, cast alloy truck, sheaves, cleats and flag clips.

parapet mounted pole

Type B1

Fixed parapet mounted pole

hinged parapet mounted pole

Type B3

Hinged parapet mounted pole for a single storey building where the pole can be laid down on the ground for servicing,replacing halyards or painting.

Hinged parapet mounted pole

Type B2

Hinged parapet mounted pole designed to lay onto the roof of the building for servicing, replacing halyards or painting

Angle mounted pole

Type B4

Angle mounted pole for face of building. Can be mounted at any height

TYPE B: 1, 2 and 3 Side fastening (vertical for wall or parapet fitting

Maximum diametre at base Maximum overall length Maximum cantilever above top fixing
76mm untapered 5 metres 4 metres
76mm tapered 5 metres 4 metres
89mm tapered 6 metres 5 metres
101mm tapered 7.5 metres 6 metres
101mm tapered 9 metres 6.5 metres
127mm tapered 10.5 metres 7.5 metres
127mm tapered 12 metres 9 metres

TYPE B4 wall mounting

Maximum diametre at base Length of pole
63mm untapered 2 metres
63mm untapered 3 metres
76mm untapered 4 metres
89mm tapered 5 metres

INCLUDES THE FOLLOWING

  • Cast alloy truck, sheave, cleat, polypropylene halyard, fixing brackets and flag clips.
Hinged

TYPE A (Hinged)

Can be lowered to the ground for servicing, replacing halyards or painting

Free-standing

TYPE A (Cantilever)

Free Standing

TYPE A : Concrete base when ground mounted, minimum suggested size is

Heights are the same in all cases
Hinge supplied with pole

Pole length Width Depth
5-7 metres 840mm 840mm
7.5 - 10.5 metres 900mm 900mm
10.5 - 12 metres 1200mm 1200mm

Larger bases should be used on unstable ground or very exposed locations. In all cases, adequate steel reinforcing rods should be used.

TYPE A : Cantilever (Free-standing)

Maximum diametre at base
73mm
untapered
76
tapered
89
tapered
101
tapered
101
tapered
101
tapered
127
tapered
150
tapered
212
tapered
Maximum O.A height above ground
5 metres 5 metres 6 metres 7.5 metres 9 metres 10.5 metres 12 metres 13.5 metres 15 metres

Recent Projects

Shop Online – Coming Soon!

Shop for aluminium products, extrusions, sheet and plate products from the comfort of your chair

RESOURCES AND DOWNLOADS

OUR PRODUCT FAMILIES

Download Our Ullrich Industrial Catalogue

Enter your email address and we will email it through

Contact Us

Australia - 1300 650 075