Select Page
  • Home
  • Ulltra Safe Products

ULLTRASAFE

Introducing Ulltrasafe – now you and your family can feel ultra-safe knowing you are protected by one of the most innovative security window and door screen systems on the market.

Our Ulltrasafe design allows a clear unobstructed view of the outdoors, while protecting your family and home. Ulltrasafe integrates seamlessly within your home and works smarter to give you peace of mind, without sacrificing your lifestyle.

All Ulltrasafe Security window and door screens are manufactured using stainless steel woven mesh, high grade innovatively designed Aluminium framing and high security hardware. When all these elements are combined they exceed all Australian standards.

Wintec Systems Ulltrasafe security products are designed and tested to withstand the harshest of Australian conditions including cyclonic debris requirements allowing you to secure your home without losing the luxury of openness.

Ulltrasafe’s unique design allows assembly without the need for screws, rivets or pins penetrating the stainless steel mesh eliminating any possible cause for corrosion.

MATERIALS & COMPLIANCE

Ulltrasafe framing is extruded from 6063 T6 premium grade aluminium alloy. The woven wire mesh is manufactured from 316 grade stainless steel to ensure corrosion resistance.

APPLICATIONS

Suitable for use in residential, commercial and industrial situations to protect you, your loved ones and your property.

COMPONENTS

Ulltrasafe is supplied as a complete system, which consists of aluminium framing, stainless steel woven wire mesh, corner infill’s and foamed acrylic bonding tape. To comply with current security Standards, all hinged and sliding doors must be fitted with triple point locking.

MAINTENANCE

Building owners are responsible for the maintenance of Ulltrasafe security screens. Regular cleaning (as advised in the table below) of the powder coating with water and a mild detergent is required to remove grime, dirt and organic growth, to maximize the life and appearance of the surface finish. When cleaning powder coated surfaces, proceed as follows:

Carefully remove any loose deposits with a wet sponge. Use a soft, non-abrasive brush and a mild detergent solution to remove dirt, salt and other deposits. Rinse off with clean water.

SECURITY SCREEN

TESTING

Testing of UlltraSafe security screens was performed at Azuma Designs NATA accredited test Laboratory during May and June of 2016 to comply with the relevant Australian Standards. The tests undertaken were.

FORCED ENTRY TESTING TO AS5039

DYNAMIC IMPACT TEST:

Simulating a physical attack on the screen mesh to attempt to force the mesh out of the frame and gain entry

LOCK ATTACK:

Consisting of a jimmy test on all locking points with a lever to attempt to break into or release the locking mechanism and gain entry

HINGE ATTACK

Consisting of a jimmy test on all hinge points with a lever to attempt to break into or release the hinge and gain entry

KNIFE SHEAR TEST:

Simulating an attack on the mesh with a very sharp knife to attempt to cut the mesh and gain entry

SIMULTATED WIND DRIVEN DEBRIS IMPACT TEST

IMPACT TEST:

A 4 kilogram piece of hardwood impacting the screen at a velocity of 29m/s (104.4km/h) followed by 8mm steel balls impacting the screen at the same velocity of 29m/s.

FORCED ENTRY TEST DETAILS

SCREEN SIZE TEST# TEST DATE
REBATED WINDOW SCREEN 1500 x 900 AZT0173.16 May 23rd 2016
FACE FIXED WINDOW SCREEN 1500 x 900 AZT0174.16 May 24TH 2016
HINGED SCREEN DOOR – AUSTRAL LOCK* 2035 x 870 AZT0175.16 May 23rd 2016
SLIDING SCREEN DOOR – AUSTRAL LOCK* 2070 x 1250 AZT0175.16 May 23rd 2016
HINGED SCREEN DOOR – ASIA ABLOY LOCK* 2040 x 870 AZTO234.16 May 23rd 2016

Note: Test doors are fitted with triple point locks

SIMULTATED WIND DRIVEN DEBRIS IMPACT TEST

SCREEN SIZE TEST# TEST DATE
FACE FIXED WINDOW SCREEN 1500 x 1800 AZT0268.16 June 15TH 2016

SCREEN OPTIONS

STAINLESS STEEL & ALUMINIUM

SCREEN
stailess steel woven mesh

We use only the finest 316 Marine grade stainless steel woven mesh which fits seamlessly into our extruded aluminium frame.

Woven mesh offers uncompromising strength, durability, corrosion resistance and clear unobstructed views without compromising security or aesthetics.

SCREEN
aluminium perforated sheet

Our perforated sheets are constructed from tempered 5052H34 marine grade aluminium with a more contemporary look in mind.

Perforated screens are a cost effective alternative to traditional screens, offering corrosion resistance and act as a sun shade to reduce heat.

SCREEN APPLICATIONS

Both aluminium perforated sheet and stainless steel woven mesh can be used in a range of products including:

> Sliding Windows
> Casement Windows
> Awnings Windows
> Double Hung Windows
> Louvre Windows

> Sliding Doors
> Hinged Doors
> Multi-track Sliding Doors
> Shop Fronts

WOVEN MESH SPECIFICATIONS

> Material: 316 Stainless Steel
> Thickness: 0.8mm
> Spacing: 2.80mm
> Aperture: 1.8mm
> Colour: Black

PART NUMBER                   SHEET SIZES

G111A24PXBKIM 750mm x 2400mm
G111C24PXBKIM 900mm x 2400mm
G111D24PXBKIM 1200mm x 2400mm

PERFORATED SHEET SPECIFICATIONS

> Material Aluminium 5052H34
> Thickness: 1.6mm
> Finish: Powder Coated
> Colour: Black
> Tolerance: +/- 0.05mm

PART NUMBER                       SHEET SIZES

S167502400PF2FG 750mm x 2400mm
S169002400PF2FG 900mm x 2400mm
S1612002400PF2FG 1200mm x 2400mm

Recent Projects

Shop Online – Coming Soon!

Shop for aluminium products, extrusions, sheet and plate products from the comfort of your chair

RESOURCES AND DOWNLOADS

OUR PRODUCT FAMILIES

Download Our Ullrich Industrial Catalogue

Enter your email address and we will email it through

Contact Us

Australia – 1300 650 075